Plug-and-play MSH150 iron soldering head

Included equipment of the MSH150 iron soldering head kit:

• Soldering head with structure, iron and heating element
• Kit cables MSH150 7m – Article number 6D00317-00-003-070 including the following three cables:
• – XLR 5-poles power cable of 7m – Article number 6D00317-00-003-071
• – I/O  sub-D 15-poles cable of 7m – Article number 6D00317-00-003-072
• – RS232 sub-D 9- poles cable of 7m – Article number 000.005.602
• Solder wire-guide kit for 0.7-0.8 mm solder wires – Article number 5-0048-02-000-30
• → Other types of standard wire-guide kits or reinforced wire-guide kits are available and can be ordered separately.
• Chisel shaped solder tip 150W 2.2mm V4G – Article number 5-0005-99-652-30
• Chisel shaped solder tip 150W 3.0mm V4G – Article number 5-0005-99-650-30
• → Other types of solder tips are available and can be ordered separately.
• Almit soldering wire SR-38 RMA LFM-48S 0.8mm – Article number 000.001.247
• → Other types of soldering wires are available and can be ordered separately.
• Complete iron cleaning unit NF02 – Article number 5-0004-02-000-23

To be defined upon orders:

• Mechanical flange Ø40-A – Article number 6D00317-10-000-001
  or
• Mechanical flange Ø50-A – Article number 6D00317-10-000-003
  or
• Mechanical flange Ø63-A – Article number 6D00317-10-000-002

Specifications of the MSH150 iron soldering head

• Iron power  150W
• Iron temperature  adjustable to 450°C (837°F) and standby mode
• Temperature accuracy  ± 2°C (after stabilization; regulation over 0-24V)
• Electrical controller  integrated in the head
• Power supply controller  24V
• Configuration interface  Bluetooth – RS232
• Communication interface  RS232 – I/O
• Air pressure  max. 6 bar
• Solder wire diameter  0.3 – 1.2 mm (1.6 mm upon request)
• Solder wire quantity accuracy  ±2.5%
• Iron head dimensions  334 x 203 x 205 mm (without monitoring camera)
• Iron head weight  ~4.8 kg (with tin spool)

Simplified configuration

The process controller is included within the soldering head itself. The controller can store up to 64 unique recipes. Many joints normally use the same solder recipe, so this provides the capability to solder hundreds of joints across multiple products. Each recipe has parameters such as soldering temperature, preheating time, quantity of solder tin.

The software allows to program the head wirelessly via Bluetooth or by RS232 cable from your laptop. Furthermore, we provide a configuration app that is compatible with Windows (>. NET4.5). Also, our app uses an intuitive HMI that allows users to easily:

– Set the head without special coding languages
– Monitor the status of the head
– Simulate the cycles

Once configured, the laptop is disconnected, and the soldering head can communicate with your robot/PLC to operate in cycles. For this purpose, two different integrations are available:

– Discrete IO which is very easily programmable and quickly integrated
– RS232 which requires more programming but offers a greater flexibility i.e. possibility to change the recipe values without going back through the configurator

Last but not least, we truly thought of everything needed and made the MSH150 soldering head simple to use, to configure and to integrate.

N.B. Only one RS232 channel can be used at a time.