Continuous Flow Dispenser CFD for mono-component

CFD continuous flow 1K dispensers

Precise, repeatable volumetric dispensing for a wide range of materials and applications.

The CFD Continuous Flow Dispensers from mta robotics use progressive cavity pump technology to ensure precise and repeatable volumetric dispensing of mono-component materials. Suitable for low- to high-viscosity and filled materials, they offer a wide range of dispensing volumes, from 0.003 ml/turn to 90 ml/turn.

Available in various sizes and configurations, CFD dispensers can be adapted to different material properties and application requirements. A choice of rotor, stator and housing materials ensures compatibility with a broad range of dispensing materials, while different motors, control interfaces and mechanical connections provide flexibility for integration.

Typical dispensing applications:
Adhesive bonding, potting and honeycomb potting, dot and line dispensing, conformal coating, glob-top dispensing, dripping and lubrication.

Typical dispensing materials:
Sealants (e.g. silicone, MS-polymer, polyurethane, methylmethacrylat), adhesives (e.g. anaerobic glue, epoxy resin, UV-Acrylat, dispersion glue), gap fillers, thermal conductive paste, solvent-based medium, grease, oil and solder paste.

Dispenser selection guide

Find the most suitable CFD dispenser based on your dispensing volume and material characteristics using our selection guide.

Choose your CFD dispensing solution

Depending on your needs, CFD dispensers are available as individual dispensing kits, through our Webshop, or as complete automated solutions using one of our standard dispensing platforms, including the MRC500, TR300, OEM robot and dispensing station.

Dispensing volume per turn* 0.003 ml to 90 ml/turn
Flowrate 3 to 80 rpm* 0.009 to 7200.0 ml/Min
Min. dispensing volume* <0.001 ml to 9ml
Max. input pressure* 6 to 20 bar
Max. dispensing pressure* 10 to 40 bar
Repeatabilitiy >99%
Power supply controller 230V/50-60Hz

*depends on material to be dispensed and dispenser size

The CFD dispensers are available in several volume and flow rate sizes. The rotors, stators and pump housings are available in
a variety of materials to provide mechanical and chemical compatibility with a broad range of materials. Lastly, customers can
choose from several motors, controls interfaces and mechanical connections such as Luer Lock, threaded and many more.

Application examples

Electronic box
Sealing of an automotive electronic box
Dispensing of mono-component silicone beads

Other typical dispensing applications:

Potting and honeycomb potting
Dot and bead dosing
Glob top
Greasing

Dispensing of low and high viscosity as well as filled materials such as cyanocrylate, adhesive, solder paste or grease.

Included equipment

The standard CFD continuous flow mono-component dispenser comes well-equipped:

Dispensing head structure
Needle cleaning unit
Needle according to application
Purge bin
Controller

Options:

Standardized robot platforms: OEM300, OEM500, MRC500 and TR300
Several motor and interface options
Material supply such as barrel, bucket, cartridge
Material preparation and supply systems such as desassing, pre-heating, homogenization

Options within mta standard platforms: