The CFD-1-Inox dispensing kit 11 uses progressive cavity pump technology and offers a high level of versatility. It is capable of dispensing volumes from 0.003ml/turn to 0.05ml/turn of low to high viscosity mono-component materials, as well as filled materials.
The kit includes a motor, a dispenser and mounting flanges, which are described in detail in the related equipment tab below.
Depending on the size and type of material to be dispensed, the rotor and stator are available in various materials to ensure mechanical and chemical compatibility with a large range of fluids. Both parts must be selected from the charts below.
Dispenser selection guide
Based on your volume and material characteristics, find the most suitable CFD dispenser here or click on the second image on the right.
Additional CFD-kits will be available online soon – please contact us fore more information.
CFD-1 rotor and stator selection
Use the following chart to select the appropriate rotor and stator:
| Rotor-type CFD-1 | ||
|---|---|---|
| Volume/turn | hard chrome plating | Passive DLC coating |
| 0.003ml/turn | 3I00406-41-000-001 | 3I00406-42-000-001 |
| 0.01ml/turn | 3I00406-41-000-002 | 3I00406-42-000-002 |
| 0.05ml/turn | 3I00406-41-000-003 | 3I00406-42-000-003 |
| Stator-type CFD-1 | ||||
|---|---|---|---|---|
| mta solvent | mta filled | mta pro | mta acrylic | |
| 0.003ml/turn | — | — | — | 3I00406-34-000-001 |
| 0.01ml/turn | — | — | — | 3I00406-34-000-002 |
| 0.05ml/turn | 3I00406-31-000-003 | 3I00406-32-000-003 | — | — |
mta solvent: high chemical resistance, not for abrasive materials e.g. isocyanate (PU), UV acrylate, solvents, anaerobic adhesives, non-filled
mta filled: resistant to chemicals and abrasion e.g. silicone, PU (resin), epoxy (resin), greases, fillers
mta pro: good chemical resistance, minimal abrasion resistance e.g. silicone, PU (resin), epoxy (resin), greases, non-filled
mta acrylic: high chemical resistance, for abrasive materials e.g. isocyanate (PU), UV acrylate, solvents, filled
Practical guide for better dispensing: BOBO’s Advice
Our technician has compiled practical tips to help you solve common dispensing problems, such as excessive pressure, overly strong suction or air bubbles. Discover possible causes and simple, effective solutions to optimize your dispensing process. See the full BOBO’s Advice or click on the fourth image on the right.
